Smart Eco Mode
The SmartEco Mode, which cleverly adjusts the lamp power to maximize power saving by delivering the best contrast and brightness performance using only as much light as needed.
296W Projector Power Consumption by Average
Enhanced Details in Darkened Scenes
163W Projector Power Consumption by Average
(Source: Futuresource Consulting Ltd, 2010)
Eco Blank Mode
The Eco Blank mode allows teachers to blank the projection screen whenever they need to direct their students’ focus back on them – or simply when the projector is not in use. When activated, this special feature dims the lamp power automatically, lowering the total power consumption by 70%.
Full Power On
100% Lamp Power
Attention on the Projection Screen
Eco Blank Mode On
30% Lamp Power at the Lowest
Attention on the Class Instructor
No Source Detected Mode
The automatic switch to Eco Blank Mode after the projector is turned on for over three minutes without a display source, eliminating unnecessary energy waste and prolonging the life of the projector lamp.
100% Lamp Power
No Source Detected
30% Lamp Power
Audio Pass through
With the built-in speaker, the MX662 can be used as an audio system when it's on the standby mode. This saves you the trouble as well as the extra budget for getting a separate audio system.
0.5W in Standby Mode
When inactive, the MX662 keeps power consumption to a minimum with 0.5W standby power, achieving what was once a challenge for ealier projector models. This technological advancement in energy saving certainly helps extend the projector lamp life and lower energy costs.
Hassle-Free Projector Maintenance
Thoughful designsAuto Power off
Automatic power off after the projector is turned on for over thirty minutes without a display source, eliminating unnecessary energy waste and prolonging the life of the projector lamp.
USB Display offers the plug-and-play convenience of USB connection – with automatic resolution detection for the best image presentation and extension support for simultaneous multi-projection display.
USB Drive Display allows teachers to teach light with a USB flash drive. All they need to do is save the files they need onto a USB flash drive and insert it in the MX662 to start teaching. File types supported are JPEG, JPG, BMP, PNG, GIF and TIFF.
|Brightness* (ANSI Lumens)
||1.07 Billion Colors
||Native 4:3 (5 aspect ratio selectable)
||1.86-2.04 (53"@ 2m)
|Image Size (Diagonal)
|Lamp Mode (Normal/Economic/SmartEco/LampSave/LumenCare)*
||1D, Vertical ± 40 degrees
||VGA(640 x 480) to UXGA(1600 x 1200)
|Vertical Scan Rate
||Computer in (D-sub 15pin) x 2(Share with component)
Monitor out (D-sub 15pin) x 1
HDMI x 1
Composite Video in (RCA) x 1
S-Video in (Mini DIN 4pin) x 1
Audio in (Mini Jack) x 1
Audio L/R in (RCA) x 1
Audio out (Mini Jack) x 1
Speaker 2W x 1
USB (Type A) x 1 (USB Reader & Wireless Display)
USB (Type mini B) x 1 (Download & UBS display)
RS232 (DB-9pin) x 1
IR Receiver x2 (Front+Top)
|Dimensions (W x H x D mm)
||312 x 104 x 244
||480i, 480p, 576i, 576p, 720p, 1080i, 1080p
||NTSC, PAL, SECAM
|Audible Noise (Normal/Economic Mode)
||AC100 to 240 V, 50 to 60 Hz
|On-Screen Display Languages
||Arabic/Bulgarian/ Croatian/ Czech/ Danish/ Dutch/ English/ Finnish/ French/ German/ Greek/ Hindi/ Hungarian/ Italian/ Indonesian/ Japanese/ Korean/ Norwegian/ Polish/ Portuguese/ Romanian/ Russian/ Simplified Chinese/Spanish/ Swedish/ Turkish/ Thai/ Traditional Chinese (28 Languages)