The DGS-108 8-Port Gigabit Ethernet Switch from D-Link provides eight speedy Gigabit Ethernet auto-sensing ports for connecting multiple computer devices to your network. Once you've connected the switch to your network via one Gigabit Ethernet port, you will have seven other ports for connecting printers, scanners, storage, backup devices, and more. Support for Quality of Service (QoS) means the switch will prioritize network traffic that is sensitive to lags, such as video streaming or VoIP calls.
The switch is unmanaged and plug-and-play, so you need not install software first to use it or configure settings for it later. Plus, the diagnostic LEDs on the front panel let you know if there are any connection issues, helping you troubleshoot problems as they arise.
Ports | 8 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) |
Queuing | Strict Priority |
Transmission Method | Store-and-Forward |
Jumbo Frames Support | 9,000 Bytes |
MAC Address Table Size | 8K |
Security Features | Kensington Lock Support |
Supported IEEE Standards | 802.1p, 802.3, 802.3 N, 802.3ab, 802.3az, 802.3u, 802.3x |
Switching Bandwidth | 16 Gb/s |
Priority Queues | 4 |
RAM Buffer | 128 KB per Device |
Power Draw | 4.5 W (Active) 1.0 W (Idle) |
DC Input Power | 5 VDC at 1 A |
Operating Temperature | 32 to 130°F / 0 to 50°C |
Operating Humidity | 10 to 90% |
Storage Temperature | -14 to 158°F / -26 to 70°C |
Storage Humidity | 5 to 90% |
Mean Time Between Failures (MTBF) | 2,053,751 Hours |
Dimensions | 6.3 x 4 x 1.1" / 16.2 x 10.2 x 2.8 cm |
Weight | 1 lb / 0 kg |