The D-Link DCS-6113 Full HD Day and Night Dome Network Camera records high-quality HD footage at 15 fps with its 1/2.7" 2 MP progressive CMOS sensor. It features a fixed 4.0 mm lens with a digital zoom capability of up to 16x and a 73.5° horizontal field of view that allows for monitoring wide areas. Integrated IR LEDs allow for recording in grayscale at a minimum illumination of 0 Lux. With the help of the built-in infrared cut removable filter, the camera offers crisp color images in day time and grayscale images in low-light conditions.
Supporting 3G mobile video, the Dome Camera enables viewing of live videos on a 3G mobile phone, anywhere within your 3GPP service area.
Videos are recorded in H.264, MPEG4, or MJPEG compression formats for uncompromised bandwidth efficiency and better utilization of network resources. In addition, the Fixed Network Dome Camera also supports H.264/MPEG-4 multicast streaming, which enables you to view content with support from a multicast IP address on the network.
The Dome Camera allows you to easily adjust various recording features like the image quality and size and the frame rate depending upon the type of location being monitored. In addition, the camera offers a provision for configuring up to 5 privacy masking zones per camera for excluding certain spaces from the image.
You can set the camera to start recording automatically when it detects movement in the motion detection window, which can be configured separately for each camera. Another flexible recording option is provided by the 3-axis gimbal that allows you to manually position the lens at any angle for monitoring complex surroundings.
Using the built-in Samba client, the DCS-6113 Camera can record videos directly on any NAS (Network Attached Storage) device. Alternately, videos can also be recorded by the camera on a microSD card via the onboard microSD Card slot.
The time-stamping feature permanently prints each frame with the original recording time, allowing the footage to be used as evidence. The integrated electronic tamper detection system promptly notifies you when it observes an attempt to disrupt or damage the camera.
Apart from this, the IP surveillance solution features the D-ViewCam software that allows you to manage up to 32 network cameras, set e-mail alert notifications, set recording schedules, and trigger motion detection to record directly to your hard drive. This software can also be used to upload your business floor plan and create a layout of the exact locations of your cameras, thereby simplifying camera management.
The built-in Power over Ethernet (802.3af) supplies power to the Dome Camera from the network itself without any extra wiring for auxiliary power outlets.
Hardware Specifications | 1/2.7" 2 Megapixel CMOS progressive sensor Minimum Illumination: 0 lux Lens: fixed length 4 mm, f/1.5, 16x digital zoom |
Field of View | Horizontal: 73.5° |
Image Features | Configurable image size, quality, frame rate, and bit rate Time stamp and text overlays Configurable motion detection windows 5 Configurable privacy masks zone Configurable WDR, white balance, shutter speed, brightness, saturation, contrast, sharpness |
Video Compression | H.264/MPEG4/MJPEG compression (simultaneous operation) H.264/MPEG-4 multicast streaming JPEG for still images |
Video Resolution | 1920 x 1080 @ 15 fps 1280 x 720 @ 30 fps 320 x 240 @ 30 fps 1280 x 1024 @ 20 fps 640 x 480 @ 30 fps 176 x 144 @ 30 fps |
Audio Support | 2-way Audio Support Audio Mute Function GSM-AMR speech encoding, 4.75 to 12.2 Kbps MPEG-4 AAC audio encoding, 16 to 128 Kbps |
Device Interfaces | MicroSD card slot Digital I/O External AV Output: NTSC/PAL switch |
Network | |
---|---|
Network Protocol | IPv4, IPv6, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP / HTTPS, Samba Client, PPPoE, UPnP Port Forwarding, RTP / RTSP/ RTCP, IP filtering, 3GPP, LLTD, CoS/QoS, SNMP, IGMP, 802.1x, ONVIF Compliant |
Connectivity | 1 x 10/100BaseT (Ethernet) with PoE |
Security | Administrator and user group protection Password authentication HTTP and RTSP digest encryption HTTPS streaming Remote client access control |
System Management | |
---|---|
System Requirements for Web Interface | Operating System: Windows 7, Windows Vista, Windows XP, Windows 2000 Browser: Internet Explorer 6 or higher, Chrome, Firefox, Safari |
D-ViewCam System Requirements | Operating System: Windows 7, Windows Vista, Windows XP Web Browser: Internet Explorer 6 or higher Protocol: Standard TCP/IP |
Event Management | Motion detection Event notification and upload snapshots/video clips via HTTP, SMTP or FTP Multiple event notification Tamper detection Supports multiple HTTP, SMTP and FTP servers Multiple recording methods for easy backup |
Remote Management | Configuration accessible via web browser Take snapshots/video clips and save to local hard drive or NAS via web browser |
D-ViewCam System Requirements | Operating System: Microsoft Windows 7/Vista/XP Web Browser: Internet Explorer 6 or higher Protocol: Standard TCP/IP |
D-ViewCam Software Functions | Remote management control of up to 32 cameras Scheduled motion triggered, or manual recording options Supports all management functions provided in web interface Viewing of up to 32 cameras on one screen |
General Specifications | |
---|---|
Power Input | 12V DC 1.25 A, 50/60 Hz, 802.3af PoE |
Maximum Power Consumption | 4.4 watts |
Operating Temperature | 32 to 104° F (0 to 40° C) |
Storage Temperature | -4 to 158° F (-20 to 70° C) |
Humidity | 90% non-condensing |
Certifications | CE (Class A)C E LVD (EN60965-1) FCC (Class A) ICES-003 C-Tick |
Dimensions | Width (Base): 5.12" (130 mm) Height: 3.85" (97.8 mm) |
Weight | 16.65 oz (472 g) |
Packaging Info | |
---|---|
Package Weight | 2.75 lb |
Box Dimensions (LxWxH) | 10.6 x 8.1 x 5.4" |