Kingston 8GB 240Pin DDR3 1600 PC3 12800 Server Memory KVR16LE11/8HB

Model

Brand

Kingston

Model

KVR16LE11/8HB

Type

240-Pin DDR3 SDRAM

Tech Spec

Capacity

8GB

Speed

DDR3 1600 (PC3 12800)

Cas Latency

11

Timing

11-11-11

tRAC

48.125ns

Voltage

1.35V

ECC

Yes

Buffered/Registered

Unbuffered

Features

ValueRAM's KVR16LE11/8 is a 1G x 72-bit (8GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, ECC, low voltage, memory module, based on eighteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

- JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply
- VDDQ = 1.35V (1.28V ~ 1.45V and 1.5V (1.425V ~ 1.575V)
- 8000MHz fCK for 1600Mb/sec/pin
- 8 independent internal banks
- Programmable CAS latency: 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (interleave without any limit, sequential with starting address “000" only), 4 with tCCD = 4 which does not allow seamless read or write (either on the fly using A12 or MRS)
- Bi-directional Differential Data Strobe
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
- On Die Termination using ODT pin
- On-DIMM thermal sensor (Grade B)
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Cº
- Asynchronous Reset
- PCB: Height 1.180" (30.00mm), double sided component