Rating Input Voltage | 2000 VA / 1200 W |
Rating Input Frequency | 60/50Hz (Auto Sensing) |
Input Phase | Single Phase |
Input Socket | with FUSE |
Cold Start (0~100% load) | Press the ON / OFF Switch |
Input Range (220V) | 140-300 |
Alarm Battery Mode | Sounding every 10 seconds |
Alarm Low Battery | Sounding every second |
Alarm Overload | Sounding every 0.5 second |
Alarm Fault | Continuously sounding |
Rating Output (VA) | 2000 |
Rating Output (W) | 1200 |
Waveform | Battery Mode (Simulated Sine Wave) AC Mode (Sine Wave) |
Power Factor | 0.6 |
Rating Output Voltage | 220V |
AC Voltage Regulation | ±10% (Battery Mode) |
Noise Level | Less than 45dB |
Rear Output Socket | 4x Universal - Battery Backup |
Transfer Time | Typical 2-6ms, 10ms max |
Humidity | 0-90% RH @ 0-40°C (Non-condensing) |
Overload Protection | : |
Line Mode | 110% ±5%; (go to fault mode after 5 minutes) 120% ±5%; (go to fault mode immediately) |
Battery Mode | 110% ±5%; (shut down after 5 seconds) 120% ±5%; (shut down immediately |
Protection | : |
Full Protection | Overload, Discharge & Overcharge Protection |
Battery & Runtime | : |
Rating | 2 X 12V/9AH |
Recharge Time | 6-8 Hours Recover To 90% Capacity |
Change Current | About 1A at Normal Mode |
Short Circuit Protection | : |
Line Mode | Fuse & Firmware Protection |
Battery Mode | Firmware Protection |
Output Frequency | : |
Rating Frequency | 60Hz or 50Hz ± 1Hz |
Line Mode | Synchronize with the Utility |
Indicators | : |
AC Mode | Green Lighting |
Battery Mode | Yellow Flashing |
Fault | Red Lighting |