ajax-loader  Loading... Please wait...
Due to recent currency fluctuations the prices of the products can be changed at any time X

Merlin-Digital
Merlin Laser scanner with Stylus
Rs 0

- +

Merlin Laser scanner with Stylus

Product Id 148519
Sold By NGCID Tech (Karachi) Feedback: 100% Positive

Sold Out

  • Condition
    New
  • Delivery
    4 - 7 Working Days
  • Availability
    Sold Out
  • Product ID
    148519
  • Warranty
  • Quantity
    - +
  • Nationwide Delivery
  • Buyer Protection Guarantee
  • Trusted Sellers Only
  • 7 days Return Policy
  • Customer Service
  • 03-111-476-725

Product Description

Getting Started

  1. Set the mode dial to [ON].

A beep sound can be heard in 4 sec. indicating it is ready for use.

Scanning Image or Note Making

  1. Set the mode dial to [ON].
  2. Press shutter button down halfway to aim the object with laser frame.
  3. Keep holding the shutter halfway until auto-focusing completed. Orange LED will stop flashing and beeping will stop when auto-focusing completed.
  4. Press the shutter fully down (another halfway) to record the image. Release the shutter when a ‘beep’ sound is stopped.

Note:

  •  
    • To avoid blurred image, keep holding the Pen stably during step 3 & step 4 above.
    • The illuminating LED flashes automatically only in low light condition

Voice Memo

  1. Set the mode dial to [ON].
  2. Press the voice button once to record the voice message. The orange LED turns on indicating that the voice message is being recorded.
  3. Press the voice button again to finish voice-memo recording. The orange LED will turn off and a beep will be heard when voice-memo recording completed.

Sleep Mode

Your Pen Scanner will go to sleep by itself after 1 minute if you are not using it. By pressing shutter button, the pen can be waken up from sleep mode in few seconds.

Viewing captured files

  1. Turn the upper part of the pen counter clockwise until unit separates.
  2. Connect the USB jack to computer, then
  3. “NOTEMARK:\” will appear on the computer as a removable disk.
  4. Click into sub-folder “\DCIM” to view the captured files.

 

Low Battery

If Pen Scanner is extremely low on power, the blue & orange will blinks alternately, and will keep beeping in every 5 sec.

In this case, you need to turn off the pen, and connect it to a computer for charging the battery.

Charging Battery

  1. Connect USB jack to the computer’s USB port.
  2. Blinking orange LED indicates charging. When the battery is fully charged. The orange blinking LED will change to Blue LED staying on.
  3. Recharging a discharge battery takes about 2 hours.

Reset

In rare case, if the Pen scanner hangs up, it can be reset by pressing [RESET] (that is near to USB Plug) with a paper clip or similar item to resume operation.

Storage Capacity

Usable memory for storage:

1000 NoteMark image files or 1000 voice-memo sound files

Total Storage: 1.98 GB

Voice-memo: total 1000 voice-memo sound files is approximation based on 1 – minute for each individual voice-memo.

Accumulated time for all voice memos is approximately 15-hours based on 1-minute per each voice-memo.

No space available in Memory

When both orange & blue turns on simultaneously, this condition indicates that the Pen scanner’s memory bank is full, and new image/voice file cannot be saved.

You must download the Pen scanner’s memory bank or erase some files to free more memory for continuous use.

System Requirements

Mac or PC with USB2.0, Mac OSX, Windows 7, Vista, XP or later, Evernote Account.

Setting the date & time

You can update the Date & time setting with your PC(Windows) for Pen Scanner by clicking the “Sync-Time.bat” file located on root-directory of Pen Scanner.

Alternatively, you can change the setting manually:

  1.  
    1. Create a new .txt file using ‘Notepad on Windows’ or ‘TextEdit on a Mac’/
    2. Type the following on two separate lines, substituting the current date and time on lines one and two:

2014//1/5

16:54

  1. Save the text file as date.txt and place in the root directory of the Notemark drive. The date & time setting on pen scanner will automatically change.

Evernote Software

Install Evernote application for windows or mac, by connecting the Pen scanner device to PC, it shows drive with some files, open evernote website shortcut to download Evernote software for your PC, Install it.

After installing Ever note desktop program. Open the program, and create account for you or Login if already have an account in evernote.

You can import selected file to Evernote, Simply right-click the file and choose “Send to”-> Evernote(Windows) ,or “Open with” -> Evernote(Mac).

Also you import files from the program, go to Tools -> import files-> select the root directory of pen scanner, and Select sync.

Then it will automatically store scanned files to Evernote Cloud, any time or anywhere you can access these files from Evernote Application.

no image
Start the discussion …

Customer Review

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Product is Coming Soon Or Out of Stock