1 Year Sony Official Warranty
Cost effective 5200 lumens 3LCD projector ideal for large classrooms and meeting rooms
The VPL-CX275 provides significantly high 5200lm/XGA projection in a compact 5.5 kg (12lbs 6oz) design. It is equipped with technologies including Bright Era® 3LCD panels, Advanced Crisp Focus lens, and 12-bit gamma correction circuit for a greater visual experience. Not only the picture is brilliant, users can expect to reduce their total operational cost due to long lamp replacement time(up to 4000h) and the intelligent auto lamp dimming function. Versatile inputs include HDMI for digital image and audio input. Additionally, features such as lens shift for fine adjustment, horizontal and vertical keystone correction, and advanced geometric correction helps installers to reduce total time of installation. With the good balance of high brightness, advanced energy saving features, intelligent installation features and affordable cost, the projector is a great fit for demanding large classrooms and meeting rooms where cost is critical.
5200 lumens 3LCD projector with 3000:1 contrast ratio, native XGA (1024 x 768) resolution and 1.5x optical zoom lens.
Up to 4000h expected lamp replacement time, ECO Mode for savings on energy and synchronised lamp and filter maintenance timing.
Vertical and horizontal keystone correction and advanced geometric correction.
Official teletext broadcasting, developed by the NCI, USA.
Controls and monitors projector status Compatible with various control systems.
The VPL-C200 Series projectors adopt a 3LCD projection system incorporating three LCD panels. This system enables each projector to present bright and natural images. By combining an advanced generation of inorganic LCD panels that utilise Sony’s BrightEra™ technology with a 3LCD projection system, the VPL-C200 Series projectors offer high picture quality and brightness. The VPL-C200 Series projectors incorporate a high-resolution lens known as the Advanced Crisp Focus (ACF) lens. Its large diameter and fine pitch ensure crisp pictures.
The VPL-C200 Series projectors incorporate 12-bit 3D gamma correction circuitry to perform highly accurate gamma correction, achieving smoother gradations and a richer grey scale. The dynamic detail enhancer generates optimised images depending on the type of input signal through the interlace-to-progressive conversion processer.
The VPL-C200 Series projectors are equipped with a High-Definition Multimedia Interface™ (HDMI), which is the latest standard for digitally connecting to high-definition (HD) devices.
With these projectors, keystone distortion of vertically up to +/- 30 degrees and horizontally up to +/- 20 degrees can be digitally corrected via the on-screen operation menu and/or the Remote Commander™ unit. This enables detailed images to be projected with their correct geometry, even when installation space is limited. Advanced geometric correction is useful when an offset projection is necessary. Each corner and side can be grabbed and fit squarely to the desired position.
The standard 1.5x zoom lens enables installation flexibility when replacing an existing projector with the VPL-C200 Series projectors – there’s no need to change ceiling mount positions. The lens shift function allows image position to be easily fine ‑ tuned vertically or horizontally.
The VPL-C200 Series projectors showcase a new low-profile chassis, so these projectors appear to blend into the ceiling or wall on which they are mounted.
By incorporating a high-performance lamp and advanced lamp-control technology, the VPL-C200 Series projectors deliver an extremely long lamp replacement time of up to 5,000 hours (approximate recommended period, in low mode). The VPL-C200 Series projectors offer remarkably low power consumption, allowing users to help save on their electricity expenses. With a single push of the ECO MODE key on either the projector or the supplied Remote Commander unit, users can select an energy-saving setting from the ECO Mode menu.
The expected lamp maintenance time for each model can reach up to 5,000 hours* depending on the selected lamp mode, and dust filters require the same maintenance interval. Synchronising the timing of lamp and filter maintenance enables users to reduce the numbers of “ladder climbs” for maintenance.
The brightness of the lamp’s output is automatically adjusted depending on the brightness of the projected image, to avoid unnecessary power consumption. When showing darker images that don’t require high brightness, lamp output decreases. The VPL-C200 Series projectors are equipped with a lamp dimming function. After 10 seconds of a static signal feed, the lamp dims by approximately 15%, which is hardly noticeable. If one of these projectors is left powered on while not in use, after a set period of time it will automatically detect no change of signal input and will dim the lamp to as low as approximately 30% of original brightness to significantly reduce energy consumption.
The VPL-C200 Series projectors can temporarily disable video signal output. This function can be easily operated with just the touch of a button on the supplied Remote Commander unit. In addition, this function allows blank image projection with low power consumption using lamp control technology.
Display system | 3 LCD system |
---|---|
Display device : Size of effective display area | 0.79” (20.1 mm) |
Display device : Number of pixels | XGA (1024 x 768) |
Display device : Aspect ratio | 4:3 |
Projection lens : Focus | Manual |
Projection lens : Zoom > Powered / Manual | Manual |
Projection lens : Zoom > Ratio | Approx. 1.5 x |
Projection lens : Lens shift > Powered / Manual | Manual |
Projection lens : Lens shift > Range > Vertical | +/- 3.3% |
Projection lens : Lens shift > Range > Horizontal | +/- 2.5% |
Projection lens : Throw ratio | 1.32:1 to 1.91:1 |
Light source : Type | Lamp |
Light source : Wattage | 280 W type |
Light source : System | – |
Recommended lamp replacement time(The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used) : Lamp mode: High | 3000 H |
Recommended lamp replacement time(The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used) : Lamp mode: Standard | 4000 H |
Recommended lamp replacement time(The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used) : Lamp mode: Low | – |
Recommended lamp replacement time(With two lamp sequential use) : Filter cleaning / replacement cycle(The figures are the expected maintenance time and not guaranteed. They will depend on the environment or how the projector is used) (Max.) | 4000 H(Same time as the lamp replacement is recommended) (cleaning) |
Screen size | 40” to 300” |
Screen size | (1.02 m to 7.62 m) |
Light output : Lamp mode: High | 5200 lm |
Light output : Lamp mode: Standard | 4400 lm(The values are estimatel) |
Light output : Lamp mode: Low | – |
Color light output : Lamp mode: High | 5200 lm |
Color light output : Lamp mode: Standard | 4400 lm(The values are estimatel) |
Color light output : Lamp mode: Low | – |
Contrast ratio (full white / full black)(This value is average) | 3000:1 |
Input : Composite video > BNC | – |
Input : Composite video > Pin Jack | 1 |
Input : S video > Mini DIN 4-pin | 1 |
Input : Computer > 5BNC | – |
Input : Computer > Mini D-sub 15-pin | 2 |
Input : Component | – |
Input : DVI-D (HDCP) | – |
Input : HDMI (HDCP) | 1 |
Input : Audio > Pin Jack (L/R) | 1 |
Input : Audio > Stereo mini jack | 2 |
Option board slot | – |
Output : Monitor > Mini D-sub 15-pin | 1(From INPUT A and INPUT B) |
Output : Audio(Works as an audio switcher function. Output from a selected channel; not available in standby) > Stereo mini jack | 1 |
I/O, Control, Others : RS-232C > D-sub 9-pin | 1 (female) |
I/O, Control, Others : LAN > RJ-45, 10BASE-T/100BASE-TX | 1 |
I/O, Control, Others : IR (Control S) input > Stereo mini jack, Plug in power DC 5 V | – |
I/O, Control, Others : IR (Control S) output > Stereo mini jack | – |
I/O, Control, Others : USB > Type A | – |
I/O, Control, Others : USB > Type B | – |
I/O, Control, Others : Microphone input > Mini jack | – |
I/O, Control, Others : Wireless | – |
Speaker | 10 W x 1 (monaural) |
Keystone correction (Max.)(Depends on resolution) : Vertical | +/- 30° |
Keystone correction (Max.)(Depends on resolution) : Horizontal | +/- 20° |
Power requirements | AC 100 V to 240 V |
Power requirements | 3.9 A to 1.7 A, 50/60 Hz |
Power consumption : AC 100 V to 120 V > Lamp mode: High | 390 W |
Power consumption : AC 100 V to 120 V > Lamp mode: Standard | 342 W (The values are estimate) |
Power consumption : AC 220 V to 240 V > Lamp mode: High | 367 W |
Power consumption : AC 220 V to 240 V > Lamp mode: Standard | 323 W (The values are estimate) |
Power Consumption (Standby Mode) - AC 100 V to 120 V | 0.5W (when “Standby mode” is set to “Low”) |
Power Consumption (Standby Mode) - AC 220 V to 240 V | 0.5W (when “Standby mode” is set to “Low”) |
Power Consumption (Networked Standby Mode) - AC 100 V to 120 V | 3.0 W (LAN) (when "Standby Mode" is set to "Standard") |
Power Consumption (Networked Standby Mode) - AC 220 V to 240 V | 3.0 W (LAN) (when "Standby Mode" is set to "Standard") |
Standby Mode/Network Standby Mode Activated | After about 10 minutes |
Heat dissipation : AC 100 V to 120 V | 1331 BTU |
Heat dissipation : AC 220 V to 240 V | 1252 BTU |
Dimensions (W x H x D) (without protrusions) | 406 x 113 x 330.5 mm |
Dimensions (W x H x D) (without protrusions) | 15 31/32 x 4 7/16 x 13 in |
Mass | 5.6 kg / 12 lb 6 oz |
Supplied accessories : Remote commander | RM-PJ7 |
Supplied accessories : Wireless LAN Module | – |
Optional accessories : Replacement lamp | LMP-C280 |
Optional accessories : Projection lenses | – |
Optional accessories : Projection lens adapter | – |
Optional accessories : Interactive pen device | – |
Optional accessories : Wireless LAN Module | – |