The A8X adds to the AX-Series as a unique model because its power and radiation characteristics allow it to be used as both a nearfield and midfield monitor. It represents a particularly attractive entry-level model for midfield monitoring which offers transparent reproduction of higher frequencies, clear mids and an excellent transient response.
The extra large, front-positioned bass reflex ports are perfectly matched with the bass/midrange driver that has a 1.5″ voice coil. Thus the A8X can play very low registers with a powerful punch, and the greatest possible precision. The 150 Watt PWM amplifier for the midrange speakers in conjunction with the 50 Watt A/B tweeter amp enable the A8X to generate impressive maximum sound pressure levels of 120dB per pair at one meter.
German Handmade Precision X-ART Tweeter
8.5“ Woofer (Carbon/Rohacell/Glass Fiber)
Amp. Power RMS / Music: 200 W / 300 W
Frequency Response: 38 Hz - 50 kHz
Max. SPL per pair at 1 m: ≥120 dB
Product Feature
X-ART tweeter, handmade in Berlin
Allows longer operation with fewer signs of fatigue
Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded X-ART membrane
Direct, fast response in the high-range even with complex transients
Ultra-light but extremely dimensionally stable woofer material (Carbon/Rohacell/Glass fiber)
Excellent transient response even at high sound levels without breakup of the diaphragm
Vertical 2-way system with 8.5” woofer
High resolution of the stereo image
Spacious bass reflex ports on the front
Bass reproduction with very low compression
Allows positioning close to walls
Highly efficient PWM amplifier for the woofer coupled with an A/B amplifier for X-ART tweeter
Low-distortion amplification at both low and high volume levels
Linear frequency response of 38 Hz to 50 kHz
Unbiased reproduction in a very wide frequency band
Maximum peak sound pressure per pair in 1 m ≥ 120 dB
Powerful, compression-free sound reproduction even at very high sound levels
Simple, stepless room acoustic adjustments over tweeter gain, low and high shelf filters
Allows optimal adaptation to acoustically difficult listening environments
Analog XLR and RCA inputs
Optimized for balanced and unbalanced line signals
Acoustically optimized cabinet geometry
Reduction of unwanted reflections on the cabinets
Directional sound radiation in vertical plane
Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
Volume control and on/off switch on the front
Very easy to use
2 years warranty with optional extension to 3 years with the registration of the product
Full repair service if required for 5 years
Adam Professional Audio A8X Specs
WOOFER
Number |
1 |
Basket Ø |
8.5" (220 mm) |
Voice Coil Ø |
1.5" (38 mm) |
Cone Material |
Carbon/Rohacell/Glass Fiber |
CONTROL PANEL
Input Sensitivity |
-∞ to +14 dB |
High Shelf EQ > 5 kHz |
±6 dB |
Low Shelf EQ < 300 Hz |
±6 dB |
Tweeter Gain |
±4 dB |
TWEETER
Number |
1 |
Type |
X-ART |
Diaphragm Area |
4 inch² (2420 mm²) |
Equiv. Diaphragm Ø |
2" (56 mm) |
Velocity Transform Ratio |
4:1 |
Diaphragm Weight |
0.17 g |
INPUT CONNECTORS
Analog |
XLR / RCA |
BUILT-IN AMPLIFIERS
Woofer |
1 |
Type |
PWM |
Amp. Power RMS / Music |
150 W / 225 W |
Tweeter |
1 |
Type |
A/B |
Amp. Power RMS / Music |
50 W / 75 W |
GENERAL DATA
Frequency Response |
38 Hz - 50 kHz |
THD 90 dB / 1 m > 100 Hz |
≤0.5 % |
Max. SPL with sine wave acoustic 100 Hz to 3 kHz at 1 m |
≥112 dB |
Max. SPL per pair at 1 m |
≥120 dB |
Crossover Frequencies |
2300 Hz |
Input Impedance |
30 kOhm |
Weight |
28.7 lb (13 kg) |
Magnetically Shielded |
No |
Height x Width x Depth |
15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) |
Panel |
Front |
Warranty |
5 years (2 years warranty plus 3 years optional with product registration) |
Delivery Contents |
Power cord, manual |