Cambridge Audio Azur 751R V2 7.2Ch AV Receiver

Product Description

Azur 751R v2 7.1 Home Cinema Receiver

200 watts RMS per channel • 6 HDMI in, 2 out with support for 3D TV / 4K and Deep colour pass-thru / Audio Return Channel reception • Anchor Bay ABT2010 video processor for upscaling and transcoding analogue video inputs to HDMI • Scaler bypass mode – allows user to engage/disengage video scaler for each analogue input as appropriate • Oversize low flux toroidal transformer and discrete amplifiers delivering ultra-low noise and distortion • Dual Texas Instruments 32-bit DSPs for compatibility with the latest CODECs including Dolby Digital Plus, DTS- HD High Resolution and the Lossless Dolby True HD and DTS-HD Master Audio formats. • Additional DSP performing 24-bit/192kHz ATF audio upsampling on all channels • Pure Analogue Stereo Direct mode for audiophile playback of analogue stereo sources. • Audyssey 2EQ Room EQ, Dynamic Volume, Dynamic Loudness and Autosetup for the best performance in almost any environment

Full 5.1/7.1 multi-channel analogue inputs and preamp outputs • DTS Speaker re-mapping or Prologic IIz post processing for 5.1 + Height configurations. • Individual Crossovers and Advanced Bass Management • Independent Zone 2 audio and video output • Neo:6 or Prologic II or IIz post-processing. • Supplied with separate zone 2 remote control • Twin subwoofer outputs • Asynchronous USB audio input allowing high resolution audio streaming from computer • Bi-amp mode for front left/right with surround back left/right in 5.1 set-up • X-Tract™ Forced/Convection Heat Tunnel for virtually silent performance • FM/AM tuner with RDS • RS232 control, IR Inputs and Outputs, Trigger outputs • Low resonance, acoustically damped full metal chassis • Also controllable from 752BD and 651BD/751BD remote.

Power output 200 watts rms per channel, 6 ohms (two channels driven) 170 watts rms per channel, 8 ohms (two channels driven) 120 watts rms per channel, 8 ohms (all 7 channels driven) HDMI HDMI 1.4a, EIA/CEA - 861D, HDCP 1.1, ARC and 4K/3D-TV/deep colour pass through supported. Architecture - Cirrus Logic CS42528 24-bit 192kHz capable CODEC for surround channels + 24-bit 2 channel A/D Conversion - Two TI Aureus DA788 32-bit DSPs - Additional ADSP-21261 40-bit DSP performing 24bit/192kHz ATF Upsampling - Anchor Bay ABT2010 scaler (for analogue video inputs only) - USB 1.0: 16-24-bit, 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz - USB 2.0: 16/24-bit 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz Audio Inputs 8 x Line Level Analogue Tuner (FM/AM) 7.1 multi-channel analogue Input 1 x asynchronous USB audio input 5 x digital co-axial, 5 x digital optical Video Inputs 6 HDMI 1.4a (5 x rear, 1 x front panel), 3 Component Video, 4 Composite, 4 S-Video, Main Audio Outputs 7 Amplified Speaker Outputs, 7.2 Preamp outputs Main Video Output 2 x HDMI (1.4a), ARC through HDMI A Zone 2 outputs Surround back channels, 2.1 preamp audio outputs, component, S-Video and composite video outputs Recording Audio Outputs 2 Line Level Analogue 2 Digital Co-Axial, 2 Digital Optical Other connections 1 1/4" / 6.35mm Headphone Output (32 To 600 ohms recommended) 3 x IR emitter outputs, 1 IR Receiver Input (un-modulated), 1 IR Emitter Input (modulated),1 x zone 2 IR emitter input, 1 control bus input/output 2 x 12V trigger outputs 1 RS232C, 1 IEC type mains inlet Max power consumption 1700W Dimensions - H x W x D 150 x 430 x 420mm (5.9 x 16.9 x 16.5’’) Weight 17.4kg (38.3lbs)

0 Comments

Login

• Homeshopping
• Facebook

Recommend 0

Share

• Twitter
• Facebook

Reload

Sort by Newest

• Newest
• Best
• Oldest

× under contstruction

Start the discussion …

Drop/click here to attach file(s)

 

Post Comment

X

Log in with