Loading... Please wait...
Product Description
Cisco AIR-AP1832I-E-K9 Wireless Access Point / Aironet
Specifications
|
Software |
Cisco Unified Wireless Network Software Release with AireOS wireless controllers: ● 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points
|
||||||||||||||||||
|
Deployment modes |
Centralized, standalone, sniffer**, Cisco FlexConnect™, monitor**, OfficeExtend**, mesh** |
||||||||||||||||||
|
Supported wireless LAN controllers |
● Cisco 2500 Series Wireless Controllers, Cisco 3500 series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 series Wireless Controllers, Cisco 5760 Wireless LAN Controller, * * Cisco Catalyst 3650 and 3850 Series Switches with integrated controller **
● Cisco Mobility Express
|
||||||||||||||||||
|
802.11n version 2.0 (and related) capabilities |
● 3x3 MIMO with two spatial streams
● Maximal Ratio Combining (MRC)
● 20- and 40-MHz channels
● PHY data rates up to 300 Mbps (40 MHz with 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic Shift Diversity (CSD) support
|
||||||||||||||||||
|
802.11ac Wave 1 and 2 capabilities |
● 3x3 MIMO with two spatial streams, single-user or multiuser MIMO
● MRC
● 802.11ac beamforming (transmit beamforming)
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 DFS
● CSD support
|
||||||||||||||||||
|
Integrated antenna |
● 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
● 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
|
||||||||||||||||||
|
Interfaces |
● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45)
● USB 2.0 (enabled via future software)
|
||||||||||||||||||
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
|
||||||||||||||||||
|
Dimensions |
● Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
|
||||||||||||||||||
|
Weight |
● 2.05 lb (930 grams)
|
||||||||||||||||||
|
Environmental |
Cisco Aironet 1830i ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% (noncondensing)
● Operating altitude test: 40˚C, 9843 ft.
|
||||||||||||||||||
|
System memory |
● 1 GB DRAM
● 256 MB flash
|
||||||||||||||||||
|
Input power requirements |
● AP1830: 44 to 57 VDC
● Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
|
||||||||||||||||||
|
Power draw |
● 15.4W
Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. |
||||||||||||||||||
|
Powering options |
● 802.3af/802.3at
● Enhanced PoE
● Cisco local power supply, AIR-PWR-C=
● Cisco power injector, AIR-PWRINJ5=
|
||||||||||||||||||
0 Comments
- Login
-
- Homeshopping
Recommend
Reload
- Sort by Newest
-
- Newest
- Best
- Oldest
Customer Review
