Loading... Please wait...
Product Description
VERTUS CLA 406.2A 600W + 300W 133 dB SPL Active Column Line Array
- 2-way bi-amplified line array column system
- 4 x 165mm (6.5”) custom woofer voice coil 38mm (1.5”)
- B&C HF neodymium driver with 36mm (1.4”) exit and 64mm (2.5”) voice coil
- Waveguide FBT large format with dispersion 100 ° H x 25 ° V
- Frequency response from 65Hz to 20KHz
- Amplifiers Class D 600Wrms for LF and HF 300Wrms with switching power supply
- Processor DSP with 8 EQ presets
- Control Panel with XLR input and link, volume, presets, filter-HP, ground-lift
- Neutrik powerCON power IN and LINK connectors
- 12mm (1/2”) birch plywood with scratch-resistant coating.
- 12 attachment points above and below for the optional hardware that allows the installation of hanging or pair two CLA406A with angle of 0 ° – 10 ° – 20 ° in the vertical plane
- Top side tilted 10 ° for the inclination of two columns without damaging gap between the waveguides for a wavefront extremely consistent over the 18kHz
- 35mm (1.3/8”) top hat for stand mount facility
- It is ideal for live applications, assisted by sub CLA 118SA, which for fixed installations
| Built-in amplifier LF/HF: | 600/300 W RMS |
| Built-in amplifier peak LF/HF: | 1200/600 W |
| Frequency response: | 65Hz – 20KHz -6dB |
| Low frequency woofer: | 4×6.5 – 1.5 coil inch |
| High frequency driver: | 1×1.4 – 2.5 coil – neodymium inch |
| Maximum SPL cont/peak: | 133 dB |
| Dispersion: | 100°x25° H x V |
| Input impedance: | 22 Kohm |
| Crossover frequency: | 1.2 KHz |
| Ac power requirements: | 640 VA |
| Input connector: | XLR with loop |
| Power cord: | 5 / 16.4 mm/inch |
| Net Dimension (WxHxD): | 190x1235x290 / 7.48×44.68×11.41 mm/inch |
| Net weight: | 27 / 59.52 kg/lb |
| Transport Dimension (WxHxD): | 290x1235x390 / 11.41×48.62×15.35 mm/inch |
| Transport weight: | 32 / 70.54 kg/lb |
0 Comments
- Login
-
- Homeshopping
Recommend
Reload
- Sort by Newest
-
- Newest
- Best
- Oldest
Customer Review
