Gigabyte GP-AP850GM Aorus 850W |
Fully Modular Design
High quality 100% Japanese Capacitors
135mm 2 ball bearing smart fan with fan stop function
80 PLUS Gold certified: above 90% efficiency at 50% load
Single +12V rail
OCP/OTP/OVP/OPP/UVP/SCP protection
HIGH QUALITY 100% JAPANESE CAPACITORS:
All capacitors are high quality Japanese capacitors, to produce the efficient performance and to ensure the longer reliability.
135MM SMART FAN:
Fan speed will be adjusted according to the system load. And the fan will stop when the system is idle or under low load (less than 20% load). The 2 ball bearing structure provides longer life time.
80 PLUS GOLD CERTIFIED:
80 Plus Gold certified ensures to deliver 90% efficiency at 50% load. The better power efficiency leads to less power waste, less heat and less fan noise. And with the support of Intel processors, it will save more energy and more money.
SINGLE +12V RAIL:
Single +12V rail provides the best power output, stability and compatibility for the hardware. It provides the easiest way to install the power cable. And it is the best design for overclocking.
PROTECTION:
In order to make sure the entire computer system to operate stably under any conditions, we not only added protection designs such as OCP, OTP, OVP, OPP, UVP and SCP, but also ensured the stable operation of your system through the safety certification of various countries.
Specifications:
Model:
GP-AP850GM
Type:
Intel Form Factor ATX 12V v2.31
PFC:
Active PFC (>0.9 typical)
Input Voltage:
100-240 Vac (full range)
Input Current:
10A
Input Frequency:
47-63 Hz
Output Capacity:
850W
Dimension:
150 x 160 x 86mm
Fan Type:
135mm Double ball bearing fan
80 PLUS:
Gold
Efficiency:
90% at typical load
MTBF:
>100,000 hours
Protection:
OVP/OPP/SCP/UVP/OCP/OTP
Power Good Signal:
100ms ~ 150ms
Hold Up Time:
> 16m sec at full load (115V)
Cable Type:
Flat, All black
Connectors:
ATX/MB 20+4 Pin x 1 : 650mm
CPU/EPS 4+4 Pin x 2 : 800mm*1 , 650mm*1
PCI-e 6+2 Pin x 6 : 750mm*2 , 650mm+150mm*2
SATA x6 + 4 Pin Peripheral x2 :
550mm+100mm+100mm+100mm*1
450mm+100mm+100mm+100mm *1
4 Pin Peripheral x 3 + 4 pin Floppy x 1 : 450mm+100mm+100mm+100mm*1
4 Pin Floppy x 1 : 100mm