Name: TASCAM DR-70D 4-Channel DSLR Audio Recorder
Brand: Tascam
Availability: InStock

Loading... Please wait...

Due to recent currency fluctuations the prices of the products can be changed at any time

Product Description

The Tascam DR-70D 4-Channel Audio Recorder & Bag Kit comes with everything you need to start making professional audio recordings for video. The kit comes with the Tascam DR-70D 4-Channel Recorder and the K-Tek Stingray Bag for the DR-70D.

Tascam DR-70D 4-Channel Audio Recording Device for DSLR and Video Cameras

Designed as an audio recording solution for filmmakers, the DR-70D 4-Channel Audio Recording Device for DSLR and Video Cameras from Tascam features dual built-in omnidirectional microphones and is capable of recording up to 4 tracks simultaneously. It has tripod mounts on both the top and bottom of the unit and can be mounted above or below your DSLR or video camera as well as on a follow-focus cage.

Recording to SD, SDHC, or SDXC cards up to 128GB, the DR-70D tracks in BWAV format for NLE compatibility. All integral parameters feature dedicated hardware controls, so you never have to go searching through menus to quickly change a setting. A dedicated camera output lets you send a mic-level signal to your camera's audio input to create a reference track for easier synching in post, while the dedicated headphone output allows you to monitor your audio.

Designed for use with video and DSLR cameras and can be screwed to the bottom of a DSLR camera with jacks and controls that stay out of the way
Simplified interface with controls on hardware switches and knobs instead of menus, for quick adjustment during a take
Dual record function captures a safety track to have a backup in case of distortion
Tascam's HDDA microphone preamps which are designed for low noise, low distortion, and full-bandwidth
BWAV format capture for NLE compatibility
Limiter and high-pass filter prevent wind or mic bumps from overdriving the recording
Microphone level camera output allows you to record the same audio to the camera for easy synchronization in your editor
Records to SD/SDHC/SDXC media
Individual headphone and camera outputs allows you to monitor recording with headphones while sending another output to the camera
Slate function records a tone for precise synchronization between DR-70D and camera audio in post
4-track recording records from four XLR microphone inputs
Built-in omnidirectional microphones allow you to record without packing mics
Runs on 4 AA batteries
K-Tek KSTG70 Stingray Bag for the Tascam DR-70D & DR-701D

Custom-tailored for the Tascam DR-70D and the DR-701D, the KSTG70 Stingray is a lightweight and durable carry bag to shield your valuable recorder from the elements. The rigid vertical frame offers ample protection while providing full access to controls and ports on both sides of the DR-70D or DR-701D. The built-in kickstand allows the recorder to rest securely at a convenient angle to monitor and adjust levels. The side zippers give access to the roomy interior to ensure plenty of space for XLR and TRS connectors.

MOLLE (Modular Lightweight Load-Carrying Equipment) straps on the front of the bag allow you to mount wireless receivers and other accessories. The front has a flap that conveniently folds down to access storage media and the battery compartment. The flap also features holes for the two built-in omnidirectional microphones on the recorder. Additionally, the 1/4"-20 screw assembly on top of the recorder can be reached by repositioning the flap to attach to a camera. A dedicated opening in the bag allows access to the tripod screw thread. Four D-rings, for use with K-Tek's Stingray Waistbelt (not included), also offer additional mounting and rigging points. A shoulder strap is included.

Built-in kickstand
MOLLE straps to attach accessories and receivers (e.g. up to three Sennheiser G3)
Full side access and roomy interior for XLR and TRS connectors
Full access to battery and media compartments; holes for DR-70D built-in microphones
Front flap re-positions for camera use, with dedicated opening for tripod mounting
Four D-rings and additional rigging points; comes with shoulder strap

Tascam DR-70D 4-Channel Audio Recording Device for DSLR and Video Cameras

Recording Media
Media	SD card (64 MB to 2 GB) SDHC card (4 to 32 GB) SDXC card (48 to 128 GB)

Recording Format
Recording Format	WAV & BWF 44.1 to 96 kHz, 16/24-bit

Channels
Number of Channels	4 channels (2x stereo or 4x mono)

XLR Inputs
Connector	4x Combo XLR/TRS Connectors (1: Ground, 2: Hot, 3: Cold)
Input Impedance	Mic/Mic + Phantom Power: 2 kOhms Line: 10 kOhms or more
Phantom Power	48 V +/-4 V(10 mA/CH), 24 V +/-4 V(10 mA/CH)
Input Level	Mic/Mic + Phantom Power: 0 dBu standard, -72 dBu maximum Line: +4 dBu standard, +20 dBu maximum
Mic Input	Mic Input Gain: +11 dB (low), +51 dB (High), +64 dB (Hi + Plus)

Stereo Mini Input
Connector	1/8" (3.5 mm) stereo mini jack (this connector can be supplied plug-in power)
Input Impedance	10 kOhms
Input Level	Minimum Input Level: -50 dBV Maximum Input Level: +10 dBV
Input Gain	Mic Input Gain: +3 dB (Low), +26 dB (High), +38 dB (High + Plus)

Camera In
Connector	1/8" (3.5 mm) stereo mini jack
Input Impedance	10 kOhms
Input Level	Standard Input Level: -10 dBV Maximum Input Level: +6 dBV

Audio Output
Line Output	Connector: 1/8" (3.5 mm) stereo mini jack Output Impedance: 200 ohms Standard Output Level: -10 dBV Maximum Output Level: +6 dBV
Camera Out	Connector: 1/8" (3.5 mm) stereo mini jack Output Impedance: 200 ohms Standard Output Level: -40 dBV Maximum Output Level: -24 dBV

Headphone Output
Connector	1/8" (3.5 mm) stereo mini jack
Maximum Output Level	20 mW + 20 mW

USB
Connector	Micro-B type
Format	USB 2.0 High Speed mass storage class

Remote
Input	2.5 mm TRS jack (remote sold separately)

Power
Power Source	4x AA batteries (Alkaline or Ni-MH) USB Bus power Optional AC Adapter Optional Battery pack
Power Consumption	5 W

Audio Performance
Frequency Response	20 Hz to 20 kHz +0.5/-2 dB (LINE IN or MIC IN to LINE OUT, Fs 44.1/48 kHz, JEITA) 20 Hz to 40 kHz +0.5/-3 dB(LINE IN or MIC IN to LINE OUT, Fs 96 kHz, JEITA)
Distortion	0.02% or less (LINE IN or MIC IN to LINE OUT Fs 44.1/48/96 kHz, JEITA)
Signal to Noise Ratio	92 dB or more (LINE IN or MIC IN to LINE OUT Fs 44.1/48/96 kHz, JEITA)
Equivalent Input Noise	-120 dBu or less

Compatibility
Windows	OS: XP, Vista, 7, 8, 8.1 CPU: Pentium 300 MHz or better RAM: 128 MB or more USB: 2.0 recommended
Mac	OS: OS X 10.2 to 10.9 CPU: Power PC, iMac, G3, G4, 266 MHz or more RAM: 64 MB or more USB: 2.0 recommended

General
Operating Temperature	32 to 104°F (0 to 40°C)
Dimensions (W × H × D)	6.65 x 2.2 x 4.2" (169 x 55.2 x 106.5 mm), with top adapter attached
Weight	With Batteries: 1.37 lb (625 g) Without Batteries: 1.16 lb (530 g)

Packaging Info
Box Dimensions (LxWxH)	10.6 x 8.1 x 4.3"

K-Tek KSTG70 Stingray Bag for the Tascam DR-70D & DR-701D

Internal Dimensions 6.7 x 2.4 x 4.7" (17.0 x 6.0 x 12.0 cm)

External Dimensions 9.8 x 1.9 x 3.1" (25.0 x 8.0 x 13.0 cm)

Weight 0.7 lb (0.3 kg)

Packaging Info

Box Dimensions (LxWxH) 10.8 x 6.0 x 3.0"

Tascam DR-70D 4-Channel Audio Recording Device for DSLR and Video Cameras


Media	SD card (64 MB to 2 GB) SDHC card (4 to 32 GB) SDXC card (48 to 128 GB)


Recording Format	WAV & BWF 44.1 to 96 kHz, 16/24-bit


Number of Channels	4 channels (2x stereo or 4x mono)


Connector	4x Combo XLR/TRS Connectors (1: Ground, 2: Hot, 3: Cold)
Input Impedance	Mic/Mic + Phantom Power: 2 kOhms Line: 10 kOhms or more
Phantom Power	48 V +/-4 V(10 mA/CH), 24 V +/-4 V(10 mA/CH)
Input Level	Mic/Mic + Phantom Power: 0 dBu standard, -72 dBu maximum Line: +4 dBu standard, +20 dBu maximum
Mic Input	Mic Input Gain: +11 dB (low), +51 dB (High), +64 dB (Hi + Plus)


Connector	1/8" (3.5 mm) stereo mini jack (this connector can be supplied plug-in power)
Input Impedance	10 kOhms
Input Level	Minimum Input Level: -50 dBV Maximum Input Level: +10 dBV
Input Gain	Mic Input Gain: +3 dB (Low), +26 dB (High), +38 dB (High + Plus)


Connector	1/8" (3.5 mm) stereo mini jack
Input Impedance	10 kOhms
Input Level	Standard Input Level: -10 dBV Maximum Input Level: +6 dBV


Line Output	Connector: 1/8" (3.5 mm) stereo mini jack Output Impedance: 200 ohms Standard Output Level: -10 dBV Maximum Output Level: +6 dBV
Camera Out	Connector: 1/8" (3.5 mm) stereo mini jack Output Impedance: 200 ohms Standard Output Level: -40 dBV Maximum Output Level: -24 dBV


Connector	1/8" (3.5 mm) stereo mini jack
Maximum Output Level	20 mW + 20 mW


Connector	Micro-B type
Format	USB 2.0 High Speed mass storage class


Input	2.5 mm TRS jack (remote sold separately)


Power Source	4x AA batteries (Alkaline or Ni-MH) USB Bus power Optional AC Adapter Optional Battery pack
Power Consumption	5 W


Frequency Response	20 Hz to 20 kHz +0.5/-2 dB (LINE IN or MIC IN to LINE OUT, Fs 44.1/48 kHz, JEITA) 20 Hz to 40 kHz +0.5/-3 dB(LINE IN or MIC IN to LINE OUT, Fs 96 kHz, JEITA)
Distortion	0.02% or less (LINE IN or MIC IN to LINE OUT Fs 44.1/48/96 kHz, JEITA)
Signal to Noise Ratio	92 dB or more (LINE IN or MIC IN to LINE OUT Fs 44.1/48/96 kHz, JEITA)
Equivalent Input Noise	-120 dBu or less


Windows	OS: XP, Vista, 7, 8, 8.1 CPU: Pentium 300 MHz or better RAM: 128 MB or more USB: 2.0 recommended
Mac	OS: OS X 10.2 to 10.9 CPU: Power PC, iMac, G3, G4, 266 MHz or more RAM: 64 MB or more USB: 2.0 recommended


Operating Temperature	32 to 104°F (0 to 40°C)
Dimensions (W × H × D)	6.65 x 2.2 x 4.2" (169 x 55.2 x 106.5 mm), with top adapter attached
Weight	With Batteries: 1.37 lb (625 g) Without Batteries: 1.16 lb (530 g)


Box Dimensions (LxWxH)	10.6 x 8.1 x 4.3"

K-Tek KSTG70 Stingray Bag for the Tascam DR-70D & DR-701D

Internal Dimensions 6.7 x 2.4 x 4.7" (17.0 x 6.0 x 12.0 cm)

External Dimensions 9.8 x 1.9 x 3.1" (25.0 x 8.0 x 13.0 cm)

Weight 0.7 lb (0.3 kg)

Box Dimensions (LxWxH) 10.8 x 6.0 x 3.0"